Chroma Studio Force II 12 User Manual page 33

Studio Force II DMX map for HSi Control Mode:
Table 18 (DMX Map-HSi)
HSi Value
1
0 - 255
2
0 - 255
3
0 - 255
4**
0 - 255
Note: Channel 1 through 3 will repeat for each cell control according to the selected grouping mode
* With Legacy hue mode enabled, the Hue channel is from Blue to Blue
** Control parameter is only present when Extended mode is enabled
Control parameter is always last, its position will change according the grouping mode.
For example, in odd/even grouping mode, the control parameter would be on 7
Studio Force II DMX map for KHi Control Mode:
Table 19 (DMX Map-KHi)
KHi Value
0 - 255
1
64
128
192
255
2
0 - 255
3
0 - 255
4**
0 - 255
Note: Channel 1 through 3 will repeat for each cell control according to the selected grouping mode
** Control parameter is only present when Extended mode is enabled
Control parameter is always last, its position will change according the grouping mode.
For example, in odd/even grouping mode, the control parameter would be on 7
Hue*
Color Spectrum 0 → 360 Red → Red
Saturation
Desaturated → Saturated
Intensity
Minimum → Maximum Intensity
Extended Controls
See Control channel table for details
Kelvin
Warm → Cold
0 2800K
3200K
4400K
5600K
6500K
Hue
Minus Green → Plus Green
Intensity
Minimum → Maximum Intensity
Extended Controls
* See Control channel table for details
www.chroma-q.com
Function
Function
28
Fade Default
Status Value
Fade 0
Fade 0
Fade 0
Snap 0
Fade Default
Status Value
Fade 128
Fade 128
Fade 0
Snap 0