Chroma Studio Force II 12 User Manual page 20

DMX Data
This option allows user to see the DMX channel intensity levels, being received by the fixture. This DMX
channel entered will be formatted and displayed on this screen, based on selected mode and grouping. The
values read from 0 to 99 (as 0%- 100% intensity).
To show DMX Data,
Fan Speed
The internal fan of the fixture can be set to four speed options to regulate noise levels and the cooling
process.
Figure 13 (Fan Mode Select Screen)
TM
Note: Studio Force II unit is internally temperature protected at all times.
To set the Fan Speed Mode,
Rotate Display
Display screen menu can be rotated 180° (upside down) by tapping on this button.
To set the orientation of the display,
Figure 12 (DMX Data Screen)
On the Main Menu, tap SETUP
Then tap DMX Data
The display shows the DMX start channel and the values (0-99) of the
DMX channels
Tap Escape to go to back
The internal fans are off and light output is reduced by
Quiet
20%.
The fan speed is at low velocity and light output is at
Studio
100%.
The fan speed is at high velocity and the light output at
Live
100%
Live- Internal fans are turned off when all DMX values are at
Quiet 0%.
On the Main Menu, tap Setup
Then tap Fan Speed option
On the Fan Speed screen, select a Fan Speed option, and then tap Apply
to save
On the Main Menu screen, tap Setup Menu.
On the Screen Setup screen, tap RotateDisp
The display screen rotates by 180 degrees
www.chroma-q.com
15