Chroma Studio Force II 12 User Manual page 15

RGBW (Red, Green, Blue and White): This mode assigns 4 DMX channels to set Red, Green, Blue and White
levels in each cell, or group of cells. It provides 4 parameter channels that directly affect the intensity of each
color within a group. Color is mixed by adjusting the levels of each of the four channels using an external
DMX controller/ console. The DMX footprint will be determined by the selected grouping option. White (of about
3,500K) is achieved with only white channel at full. Refer to the Table 7 (SFII 72 DMX Grouping),Table 8 (SFII
48 DMX Grouping),Table 9 (SFII 12 DMX Grouping), for detail on grouping selection and DMX footprints. The
DMX map is shown in Table 16 (DMX Map-RGBW).
To set the fixture to RGBW mode,
On the Main Menu, tap Mode
On the Mode screen, tap RGBW
Tap Apply to save or Escape to cancel
RGB (Red, Green, and Blue) gives 3 parameter channels directly affecting the intensity of the corresponding
group. Color is mixed by adjusting the levels of the three primary colors in each group. The DMX footprint will
be determined by grouping option selected. The white color is automatically mixed in when all three colour
parameters are engaged. The DMX map is shown in Table 17 (DMX Map-RGB).
To set the RGB mode,
HSi (Hue, Saturation and Intensity) gives 3 control channels to each group; 2 channels for hue and
saturation and one intensity channel. A separate definable intensity channel is particularly useful when
creating intensity chases or when the grand master is used. The hue channel has 255 different colors
available and the saturation channel specifies the saturation level of that color. The saturation channel is fully
saturated at full. White is achieved with the intensity channel to full and the saturation channel at zero. With
this mode enabled, the Hue channel is from Red to Red (R→G→B→R). The DMX map is shown in
(DMX Map-HSi).
**Extended Control Channel: An extra Control parameter can be enabled, it will be place as the last
parameter of the fixture control mode. The Control channel allows for remotely control certain aspect of the
fixture such as the fan speed, PWM frequency and more functions.
On the Main Menu, tap Mode
On the Mode screen, tap RGB
Tap Apply to save or Escape to cancel
www.chroma-q.com
10
Table
18