Mouse Dynasync Mode; Automatic Mouse Synchronization (Dynasync) - ATEN CS1708i User Manual

CS1708i / CS1716i User Manual

Mouse DynaSync Mode

Synchronization of the local and remote mouse pointers is
accomplished either automatically or manually.

Automatic Mouse Synchronization (DynaSync)

Mouse DynaSync provides automatic locked-in synching of the remote and
local mouse pointers – eliminating the need to constantly resync the two
movements.
Note: This feature is only available for Windows and Mac systems (G4 and
higher) whose adapter attribute OS setting is configured for Win or
Mac, which are connected to the switch with one of the following KVM
Adapter Cables with USB interface: KA7170 or KA9170.
All other configurations must use manual mouse synchronization
(described in the next section).
The icon on the Control Panel indicates the synchronization mode status as
follows:
Icon
This icon displays in gray to indicate that Mouse DynaSync is not
available – you must use manual synching procedures.
The green check mark on this icon indicates that Mouse DynaSync
is available and is enabled.
The red X on this icon indicates that Mouse DynaSync is available
but is not enabled.
When Mouse DynaSync is available, clicking the icon toggles its status
between enabled and /disabled. If you choose to disable Mouse DynaSync
mode, you must use the manual synching procedures described under Manual
Mouse Synchronization, page 83.
82
Function