Upgrade Main Firmware - ATEN CS1708i User Manual

CS1708i / CS1716i User Manual

Upgrade Main Firmware

As new versions of the firmware become available, they can be downloaded
from our website. Check the website regularly to find the latest information and
packages.
To upgrade the device over IP function (iCard) firmware, do the following:
1. Download the latest IP card firmware to your computer.
2. Log in to the CS1708i / CS1716i; and click the Maintenance tab. The
Maintenance tab opens to the Firmware File page:
3. Click Browse; navigate to the directory that the new IP card firmware file
is in and select the file.
4. Click Upgrade Firmware to start the upgrade procedure.
 If you enabled Check Main Firmware Version, the current firmware
version is compared with that of the upgrade file. If the current version
is equal to or higher than the upgrade version, a popup message
appears to inform and stops the upgrade procedure.
 If you didn't enable Check Main Firmware Version, the upgrade file is
installed without checking what its version is.
 As the upgrade proceeds, progress information is shown in the
Progress bar.
 Once the upgrade completes successfully, the switch resets itself.
5. Log in again, and check the firmware version to be sure it is the new one.
Note: To recover from a "failed upgrade" situation, see Firmware Upgrade
Recovery, page 143.
142