Operation Mode; Edid Mode - ATEN VM0404HB User Manual

VM0404HB / VM0808HB User Manual

Operation Mode

The EDID Mode, CEC, and Output Status features can be configured from the
Operation Mode page.
EDID (Extended Display Identification Data) is used to have the
VM0404HB / VM0808HB automatically apply a preset video
configuration or EDID Mode, which utilizes the best resolution across
different monitors
Consumer Electronics Control (CEC) allows interconnected HDMI
devices to communicate and respond to one remote control
The Output Status shows whether the video/audio of an Output port is
turned on or off and allows viewing and setting of the Output
Resolution
To configure the VM0404HB / VM0808HB's operation mode settings from
the Main Screen, use the Menu pushbutton to access the Menu page, press 8 or
to navigate to the next page, then press pushbutton 1 to access the
Operation Mode page.
1: Operation Mode
2: Security Mode

EDID Mode

To configure the EDID Mode, do the following:
1. From the Operation Mode page, press pushbutton 1:
1: EDID Mode
2: CEC
2. Press pushbuttons 1–4 to make your selection.
1: Default (In use) 3: Remix
2: Port 1
24
7: Back
8: Next
8: Next
4: Customized
(Continues on next page.)