Anms - ATEN CS1708i User Manual

CS1708i / CS1716i User Manual

ANMS

The ANMS (Advanced Network Management Settings) page is used to set up
login authentication and authorization management from external sources. It is
organized as described, below:
Event Destination
 Log Server
When Enable Log Server is checked, important transactions that occur on
the CS1708i / CS1716i, such as logins and internal status messages, are
kept in an automatically generated log file.
 Specify the MAC address of the computer that the Log Server runs on
in the MAC address field.
 Specify the service port used by the computer that the Log Server runs
on to listen for log details in the Port field. The valid port range is 1–
65535. The default port number is 9001.
Note: The port number must different than the one used for the Program
port (see Program, page 119).
See Chapter 14, The Log Server, for details on setting up the log server.
The Log File is discussed on page 139.
122