Osd Factory Default Settings; About Sphd Connectors; Limited Warranty - ATEN CS1708i User Manual

CS1708i / CS1716i User Manual

OSD Factory Default Settings

The factory default settings are as follows:
Setting
OSD Hotkey
Port ID Display Position
Port ID Display Duration
Port ID Display Mode
Scan Duration
Scan-Skip Mode
Screen Blanker
Logout Timeout
Beeper
Accessible Ports

About SPHD Connectors

This product uses SPHD connectors for its KVM and/or
Console ports. We have specifically modified the shape of these
connectors so that only KVM cables that we have designed to
work with this product can be connected.

Limited Warranty

IN NO EVENT SHALL THE DIRECT VENDOR'S LIABILITY EXCEED THE PRICE PAID
FOR THE PRODUCT FROM DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THE PRODUCT, DISK,
OR ITS DOCUMENTATION.
The direct vendor makes no warranty or representation, expressed, implied, or statutory with
respect to the contents or use of this documentation, and especially disclaims its quality,
performance, merchantability, or fitness for any particular purpose.
The direct vendor also reserves the right to revise or update the device or
documentation without obligation to notify any individual or entity of such
revisions, or update. For further inquiries, please contact your direct vendor.
194
Default
[Scroll Lock] [Scroll Lock]
Upper Left Corner
3 Seconds
Port Number plus Port Name
5 Seconds
All
0 (Disabled)
0 (Disabled)
Y (Activated)
F (Full) For all Users on all Ports