Operation Mode; Edid Mode - ATEN VM5404HA User Manual

VM5404HA / VM5808HA User Manual

Operation Mode

The EDID Mode, CEC, OSD, Output Status, and array mode features can be
configured from the Operation Mode page.
 EDID (Extended Display Identification Data) is used to have the
VM5404HA / VM5808HA automatically apply a preset video
configuration or EDID Mode, which utilizes the best resolution across
different monitors
 Consumer Electronics Control (CEC) allows interconnected HDMI
devices to communicate and respond to one remote control
 The OSD, when enabled for a port, lets an attached display/monitor
show real-time port switching information
 The Output Status shows whether the video/audio of an Output port is
turned on or off and allows viewing and setting of the Output
Resolution
To configure the VM5404HA / VM5808HA's operation mode settings from
the Main Screen, use the Menu pushbutton to access the Menu page, press 8 or
Next to navigate to the next page, then press pushbutton 1 to access the
Operation Mode page.
1: Operation Mode
2: Security Mode

EDID Mode

To configure the EDID Mode, do the following:
1. From the Operation Mode page, press pushbutton 1:
1: EDID Mode
2: CEC
18
7: Back
8: Next
8: Next
(Continues on next page.)