VM51616H User Manual
Operation Mode
The EDID Mode, CEC, OSD and Output Status features can be configured
from the Operation Mode page.
EDID (Extended Display Identification Data) is used to have the
VM51616H automatically apply a preset video configuration or EDID
Mode, which utilizes the best resolution across different monitors
Consumer Electronics Control (CEC) allows interconnected HDMI
devices to communicate and respond to one remote control
The OSD, when enabled for a port, lets an attached display/monitor
show real-time port switching information
The Output Status shows whether the video/audio of an Output port is
turned on or off and allows viewing and setting of the Output
Resolution
To configure the VM51616H's operation mode settings from the Main Screen,
use the Menu pushbutton to access the Menu page, then press pushbutton 3 to
access the Operation Mode page.
1: IP Setting
2: Serial Port Setting
3: Operation Mode
4: Security Mode
EDID Mode
To configure the EDID Mode, do the following:
1. From the Operation Mode page, press pushbutton 1:
1: EDID Mode
2: CEC
3: OSD
4: Output Status
22
: Next
(Continues on next page.)