Setting The Port Operating System; Restore Default Values - ATEN CS1708i User Manual

CS1708i / CS1716i User Manual
Toggling the OSD Hotkey
The OSD Hotkey (see OSD HOTKEY, page 32) can be toggled between [Scroll
Lock], [Scroll Lock] and [Ctrl], [Ctrl]. To toggle the OSD Hotkey, do the
following:
1. Invoke Hotkey Mode (see page 41).
2. Press [T].
After you press [T], the command line displays HOTKEY HAS BEEN
CHANGED for one second; then the message disappears and you
automatically exit Hotkey mode.

Setting the Port Operating System

A KVM port's operating system attribute can be set to match the OS used by
the computer attached to the port. To set a port's operating system attribute, do
the following:
1. Invoke Hotkey Mode (see page 41).
2. Press a Function key according to the information shown in the following
table:
Key
F1
F2
F3
After pressing a function key you automatically exit Hotkey mode.

Restore Default Values

This administrator only hotkey restores the CS1708i / CS1716i default values
(see RESTORE DEFAULT VALUES, page 35). To restore the default values,
do the following:
1. Invoke Hotkey Mode (see page 41).
2. Press [R].
3. Press [Enter].
After you press [Enter], the command line displays RESET TO DEFAULT
SETTING for three seconds; then the message disappears and you
automatically exit Hotkey mode.
46
Description
Sets the Port OS to Win (PC Compatible)
Sets the Port OS to Mac
Sets the Port OS to Sun