Scan; Array Mode; Filter - ATEN CS1708i User Manual

CS1708i / CS1716i User Manual

Scan

Scan is found at the bottom of the AP GUI Sidebar. It automatically switches
among all the ports that are visible in the Sidebar (see Filter, below), at regular
intervals, so that their activity can be monitored automatically. See Auto
Scanning, page 155.
Note: This item doesn't appear at the bottom of the Sidebar in the Browser
version. In that version, you must invoke it from the port's Toolbar. See The
Port Toolbar, page 153 for details.

Array Mode

Array is found at the bottom of the Browser and AP GUI Sidebar. It represents
another way of monitoring port activity. Under this function your screen is
divided into a grid of panels, with each panel showing the video display of a
particular port. Only ports that are visible in the Sidebar (see Filter, below), and
that are online are displayed – all other ports are blank. See Panel Array Mode,
page 158 for details.
Note: This item doesn't appear at the bottom of the Sidebar in the Browser
version. In that version, you must invoke it from the port's Toolbar. See The
Port Toolbar, page 153 for details.

Filter

At the bottom of the sidebar are the filter options which allow you to control
the number and type of ports that display in the Sidebar (also see Scan and
Array Mode, above):
90