Table of Contents
Advertisement
WARNING
Troubleshooting
37
Under no circumstances is the attenuator card to be machined, ground or
scraped. Beryllium oxide in a powder form is a hazardous material may be
injurious to your health if inhaled. Defective attenuator cards should be
returned to Agilent Technologies for proper disposal.
4. Install the eight screws (10) that hold the two housings (9) and (30).
To troubleshoot the attenuator perform the operator's check. If the
instrument does not perform within limits, check the connectors. If the
connectors are not damaged, replace the attenuator cartridge assembly.
Figure 2
Attenuator Exploded View
37
Agilent Technologies 8498A Operating and Service Manual 7
Service
37
Advertisement
Table of Contents
