Installation - Farfisa EH9262CW series Technical Manual

DOOR STATIONS

INSTALLATION

VD2120CPL
CD2131PL
CD2132PL
CD2134PL
CD2138PL TD2100PL
Place the push-button panel back box at a height
of about 1.65m (5' 5") from the floor keeping the
front edges flush-mounted and vertical to the
finished plaster.
Position the camera in such a way that
sunlight or other direct or reflected light
sources with high intensity do not hit the
camera lens.
Assembling modules side by side
Insertion of spacers between back boxes.
Spacers and cable bushing must be inserted
before brick work.
Openings for cables.
Flush mounting and cables
placing.
Mounting
modules.
3.
13
(MT13 - En 2015)
Fix lower part of the
frame to the back box
and make the electrical
connections.
Fixing of the module frames on the upper side by
the 2 small screws included in the back boxes.
Fixing of frame to back box.
Align the frame before tightening
the screws.
3