Intercom Systems - Farfisa EH9262CW series Technical Manual

Si 54CM/14
MULTI-WAY INTERCOM SYSTEM CONNECTED TO 1 OR MORE DOOR STATIONS
Intercoms
(1)
... EX352
... EX362 (1)
Door stations with digital keyboard (PE)
- series PROFILO
... AD2120CPL
... TD2100PL (1)
... PL72
... PL82
... PL92 (2)
- series MATRIX
... AD2110MAS
... TD2100MAS (1)
... MA72
... MAS62
... MA92 (2)
CONVENTIONAL door stations with digital encoder (PE)
- series AGORA'
... AD2121CAG-AD2121CAGL
... AG100TS - AGL100TS
... AG21 - AGL21
... AG20 - AGL20
- series PROFILO
... AD2120CPL
... CD2131PL÷CD2138PL
(1)
... PL24S - PL228S
... PL20 - PL50
... PL72 - PL73
... PL82 ÷ PL89
... PL92 ÷ PL99 (2)
- series MATRIX
... AD2110MAS
... CD2131MAS÷CD2134MAS
(1)
... MAS24S
... MAS20
... MA72 - MA73
... MAS62 - MAS63
... MA92 - MA93 (2)
Other articles
... 2220S
1 2221ML - 2221S
1 DV2420
... FP (3)
(3)
... PA
... SE (3)
... According to the number of users (max. 100 intercoms) and door stations.
(1)
Articles to be programmed.
I
(2)
Rain shelters are used in replacement of back boxes and hood covers.
N
(3)
Articles not supplied by ACI Farfisa.
T
Installation notes
E
- If you use more than 4 push-button modules (door station), you must power the name-plate
R
LEDs of the additional modules with an 12Vac supplementary transformer (see page 5.15).
C
- In this diagram you can install 100 intercoms with a maximum system distance of 1000
metres.
O
- For the connection, see page 5.14. For the cross section of the wires, see the table on the
M
side or the table 5.3 of page 5.8.
S
- We recommend to install all articles framed with a broken line in the same switchboard.
Exhito intercom with 3 buttons
Exhito intercom with 8 buttons
Module with integrated door speaker
Digital push-button panel
Back box with module frames
Hood cover
Rain shelter with module frames
Module with integrated door speaker
Digital push-button panel
Back box with module frames
Front frame
Rain shelter with module frames
(1) Intercom door station
(1) Push-button door station
Single button module
Blank module
Module with integrated door speaker
(1) Digital encoder modules
Button modules
Blank and number modules
Back boxes with module frames
Hood covers
Rain shelters with module frames
Module with integrated door speaker
(1) Digital encoder modules
Button module
Blank module
Back boxes with module frames
Front frames
Rain shelters with module frames
Transformer
Line power supply
Line distributor
Floor push-button (optional)
Door release button (optional)
Electric door lock (12Vac-1A)
Programming
After all the connections have been made and the system
powered up, proceed to programming the apparatus listed
below in the order shown.
Door stations:
- Door station address
- First button address (encoder and additional button mod-
ules)
- Enter the user names (digital keyboard)
Internal stations:
- User address (see chapter 2)
- Activation of buttons to enable the entrances from inter-
coms (optional)
Possible extensions of the system
- Intercoms in parallel in individual apartments
- Application of actuators for various services (see page
5.20)
- Application of one or more keeper exchangers (see page
5.21)
Operation mode.
By making a call from the door external station you can
activate the call of the desired intercom. When you lift the
handset, the internal station starts the conversation and can
activate the door lock by pressing the key
For more detailed information on operation see the descrip-
tion of the different products (chapters 2 and 3).
Busy signal on the external door stations.
A busy signal indicates that there is a call or conversation
going on from the other external door station.
Maximum distance of the sections A and C
diagram)
Section
A
C
With 1mm² wires this intercom installation can reach the
maximum distance of 1 000 metres.
5.
50
(MT13 - En 2015)
.
Cable type
1mm² (art.2302) 0.2mm² (AWG24)
50 metres 5 metres
1000 metres 100 metres
(see