User Settings - Farfisa EH9262CW series Technical Manual

INTERNAL STATIONS

USER SETTINGS

The following settings can be changed by the user without affecting the
correct operations of the videointercom or of the whole system. User
can change: - user name in the contacts – volume levels of ringing
melodies and tones – ringing melodies – language – character size on
the screen.
Function of buttons during user settings
Cursor Up
Previous page or exit
ok
Cursor Down
Next page or Enter
While the videointercom is OFF,
press shortly the "menu" button
(less than 4 seconds); user menu
is displayed: Contacts, Audio,
Language, Font size.
Contacts – In contacts, if programmed during the installation of the
videointercom, are listed the name of users, door stations and
actuators whose sorting,
ringing melody and name can
be changed. Move the cursor
to "Contacts" and press OK;
the list of users (eg. Mr. Robert
Brown, Oxford street entrance,
Car gate) and the "Sorting"
option are displayed.
To change a name and the
associated ringing melody it is
necessary to select the name
to change using buttons
and press OK; functions label
and ringing melody are
displayed.
SET UP MENU
CONTACTS
( press for less
than 4 seconds )
AUDIO
LANGUAGE
FONT SIZE
M e n u
C o n t a c t s
A u d i o
L a n g u a g e
F o n t s i z e F o n t s i z e
C o n t a c t s
R o b e r t B r o w n R o b e r t B r o w n
O x f o r d s t r e e t e n t r a n c e O x f o r d s t r e e t e n t r a n c e
C a r g a t e C a r g a t e
S o r t i n g
R o b e r t B r o w n R o b e r t B r o w n ( 1 0 4 )
L a b e l
R i n g t o n e R i n g t o n e
NAME LIST
SORTING
DOOR BELL
RING TONE PERIOD
KEY TONE
RING TONE LEVEL
TONE LEVEL
LANGUAGE LIST
NORMAL
LARGE
(MT13 - En 2015)
- Label – select "Label" to
change the name (eg. from "Mr.
Robert Brown" to "Uncle
Robert"); press buttons
to move to the character to
change, keep pressed buttons
to quickly search the new
character and press OK;
automatically the cursor moves to the next character; continue until all
the corrections have been made and press OK. Press OK again to
exit the page; the "save" menu will be displayed: select "clear" to go
back, select "save" to exit saving the new name, select "don't save"
to exit without saving the new name.
- Ring tone– move the cursor
to "Ring Tone" – press OK; list
of available ringing melodies
is displayed (in green the
present one). Use buttons
to scroll the list and hear
the melodies – press OK to
select the desired one – press
to exit.
Repeat all the above operations to change other user names or press
to exit.
Sorting of names
To change the order of names in the contact list it is necessary to select
"Sorting" in the "Contact" menu and press OK – select the name to move
and press OK – with buttons move the name up or down until it
reaches the desired position and press OK to confirm.
Press to go back to the previous page.
Audio - procedure described on page 2.17.
Language - procedure described on page 2.18.
Font size - procedure described on page 2.18.
LABEL
RING TONE EDIT
SELECT THE NAME MOVE WITH
RINGING MELODY LIST
EDIT
DISABLED
ENABLED
ADJUST THE LEVEL
2.
19
E d i t
U n c l e Ro b e r t
R i n g t o n e R i n g t o n e
D i n D o n D i n D o n
S c a l a
P i r i p i r i p i
T i r i t i r i t i
Tu r k e y
CANCEL
SAVE
DON'T SAVE
CANCEL
SAVE
DON'T SAVE
2