Operation - Farfisa EH9262CW series Technical Manual

INTERNAL STATIONS

OPERATION

Function of buttons with videointercom in stand-by (screen
OFF)
Settings
Door Lock release
ok
Contacts (list of door stations or internal users you wish to
call)
Monitor
Function of buttons with videointercom ON and connected to
the videointercom line
Videointercom Settings (door station selection and audio-
video adjustments)
Door Lock release
ok
Muting (enable/disable microphone)
Start and close communication
Call from the door station
When a call is made from the external door station, the videointercom
starts ringing (according to programming), the calling user is displayed
on the screen for around 30 seconds. If time has expired and the
videointercom turns OFF, press the button
external door station.
To start the conversation with the external door station, for around 90
seconds, press the button .
If it is desired to disable the audio to the door station, but continuing
hearing the audio from the door station, press shortly the button
while audio is disabled on the screen it is shown, in flashing mode, the
symbol . To restore the audio to the door station, press again the
button ; the symbol disappears from the screen.
In case of a call to a user with more than one videointercom in parallel
in the same apartment, all the videointercoms will ring, but only the
videointercom with room address 0 will turn ON. To answer from this
videointercom follow the instructions above. It is also possible to
answer from any other videointercom of the apartment by pressing on
it button , this videointercom will turn ON and at the same time the
intercom that had been turned ON before, switches OFF. If, after having
seen the image, you wish to talk with the calling door station, press
again the button .
To operate the electric door lock release press the button
To end the communication and switch OFF the videointercom press the
button . The videointercom switches OFF automatically also when
the communication time expires.
Monitor function and connection with one or more external door
stations.
With the system in stand-by and no any conversation in progress, it is
be possible to monitor the external door stations by pressing the button
on the videointercom.
If the installation includes more external door stations to monitor them
selectively it is necessary to press the button "menu"; from the list
select the requested entrance and press button OK. Pay attention to
press the button only once because a second pressure of this button will
activate the door lock release.
The monitor function lasts about 30 seconds, but will be interrupted in
case of a call from an external door station.
Monitor function can be executed also selecting the entrance to monitor
from the list:
Press button
If pressing the button
the list) the videointercom remains switched OFF and a busy tone is
heard, the system is busy and it is necessary to wait until the system
becomes free.
If a supplementary camera is
connected to the door station, to switch
the signal between the 2 cameras it is
necessary to: -press button "menu" –
select "camera" - press button OK
(any time you press button OK the
image switches from one camera to the other).
Making or receiving a call from another user or from another
device in the same apartment.
When the installation is in stand-by, you can make an intercommunicating
call to another user or to another device in the same apartment; you must
have stored the names and address of the desired users or devices in
the "Contacts" list.
Display the contact list by pressing button
requested user or device and press the button OK; on the screen
appears the name of the user and you will hear a calling tone to confirm
the call has been made; if you get a busy tone, wait until the system
becomes free.
The videointercom of the other user will ring (without switching-ON) with
the programmed melody. If the called user answers within 30 seconds,
a 90-second conversation starts, otherwise the system goes back to
free.
to reconnect with the
The internal conversation will be automatically interrupted in case of call
from external door station to any other user.
Audio-video adjustments
To adjust audio and video parameters it is
;
necessary that the videointercom will be
ON and connected to an external door
station after a call from the door station or
a monitor function (button
Press "menu"; the following list will be
displayed: camera, list of entrances or
services (if previously stored – see
paragraph "contacts" on page 2.19),
settings. Select "settings" and press OK –
select "volume" to adjust, pressing buttons
, the volume level (loudspeaker) or
select "video" to adjust contrast, brightness
and colour of the image.
If the videointercom, instead of
.
communicating with the door station is
intercommunicating with another user,
pressing "menu" only audio adjustments
are displayed (because there is no image
on the screen).
2.
20
(MT13 - En 2015)
– select the entrance – press OK to confirm.
(or OK when selecting the door station from
C a m e r a
E n t r a n c e
G a t e
S e t t i n g s
, from the list select the
C a m e r a
E n t r a n c e
G a t e
S e t t i n g s
).
S e t t i n g s
A u d i o l e v e l A u d i o l e v e l
V i d e o
G a t e
S e t t i n g s
S e t t i n g s
A u d i o l e v e l A u d i o l e v e l