Installation Sequence - enphase ENV-S-WM230 Installation And Operation Manual

Installation Sequence

11
1. Choose a location
for the Envoy-S
2. Provide a power
connection
3. Install CTs, if needed
4. Optional: Install DRM &
a central disconnect
5. Energise the Envoy-S
6. Launch Installer Toolkit
and start AP mode
7. Detect devices
8. Verify system configuration
9. Connect to Enlighten
10. Send summary report
© 2016 Enphase Energy Inc.
Envoy-S Metered Multiphase Installation and Operation
141-00035 Rev 01