Technical Data - enphase ENV-S-WM230 Installation And Operation Manual

Technical Data

Model Numbers
Enphase Envoy-S Metered™
ENV-S-WM-230
Accessories (order separately)
Current transformers (CTs)
CT-100-SPLIT
Enphase Mobile Connect™
CELLMODEM-02
Wire / Power Requirements / Specifications
Power
Capacity
Number of Enphase
Microinverters polled
Number of Enphase AC
Batteries polled
Mechanical Data
Dimensions (WxHxD)
Weight
Environmental Data
Ambient temperature range
Relative humidity
Environmental rating
Altitude use
Cooling
Internet Connection Options
Integrated Wi-Fi
Ethernet
Mobile network
41
Envoy-S Metered Multiphase Installation and Operation
Enphase communications gateway with integrated single phase PV and
consumption metering. PV production metering and optional consumption
monitoring.
WxHxD: 61 mm x 51 mm x 35 mm.
Lead length 4 m, extendable to 213 m depending on wire size.
Order extra CTs if monitoring multiple phases.
Plug and play industrial grade cellular modem with five-year data plan for
systems up to 60 microinverters. (Available where there is adequate mobile
service in the installation area.)
230 VAC or 400Y/230 VAC, 50 Hz. Max 20 A overcurrent protection required.
When hard wired outdoors, the Envoy-S must be installed in an IP54 rated, or
better, enclosure. (Use an appropriately rated enclosure if hard-wiring indoors.)
The supply wiring must be 2.5 mm
protected by a max 20 A breaker
Up to 600
Up to 39
213 x 126 x 45 mm
0.5 kg
-40° to 46° C when installed in an IP54-rated enclosure
95%
IP30. For installation indoors, or when hard wired outdoors, the Envoy-S must be
installed in an IP54 rated, or better, enclosure. Use an appropriately rated
enclosure if hard-wiring indoors.
To 2000 meters
Natural convection
802.11b/g/n (2.4 GHz, 5 GHz)
Optional, 802.3, Cat5E (or Cat 6) UTP Ethernet cable (not included). If used, must
be fitted with included ferrite bead.
Optional, CELLMODEM-02 (not included)
© 2016 Enphase Energy Inc.
2
copper rated to 75º C or better, and it must be
141-00035 Rev 01