Adjusting The Timing Plate - Yamaha 250GETO Service Manual

13. Install the retaining plate r.
r
14. Connect the negative battery cable t,
positive battery cable y, positive battery
lead u and PTT motor lead i.
u
Positive terminal nut:
7 N·m (0.7 kgf·m, 5.2 ft·lb)
Starter motor negative battery cable
bolt:
18 N·m (1.8 kgf·m, 13.3 ft·lb)
15. Install the timing plate o.
o
a
6S35H11
NOTE:
9 Align the marks a on the timing plate o,
which you made during disassembly.
9 For adjustment procedures, following
"Adjusting the timing plate" steps.
16. Install the all removed parts.

Adjusting the timing plate

NOTE:
6S350015
Remove the all spark plugs and lock plate
before adjusting the timing plate.
1. Remove the flywheel cover.
2. Slowly turn the flywheel magnet clock-
wise, align the piston of the #1 cylinder at
the TDC.
t
3. Install the dial gauge 1 into the #1cylin-
i
der.
i
y
6S350025
NOTE:
Set the dial gauge to "zero" position which is
more than 3 mm from TDC.
1
Dial gauge set 1: 90890-01252
Crankcase
1
2
3
4
5
6
6S330350
7
8
9
5-46