Removing The Power Unit - Yamaha 250GETO Service Manual

POWR

Removing the power unit

NOTE:
It is recommended to loosen the flywheel
magnet nut before removing the power unit to
improve working efficiency.
1. Remove the junction box cover, and then
disconnect the negative battery cable 1,
positive battery cable 2, positive battery
lead 3 and PTT motor lead 4.
3
2. Remove the retaining plate 5 and plate
6.
5
6
3. Loosen the cable holder 7 and remove
the shift lever 8.
5-11
Power unit
1
4
4
2
6S350020
6S350010
8
7
6S350050
4. Set the remote control lever in the neutral
position, and then disconnect the shift
cable 9, throttle cable 0.
0
9
5. Disconnect the main coupler q and PTT
switch coupler.
6. Remove the flywheel cover and the
intake silencer.
7. Disconnect the fuel hose and oil hose.
8. Disconnect cooling the water pilot hose
w and ground lead e.
e
6S350700
q
6S350040
w
6S350030
6S35H11