Assembling The Ptt Motor - Yamaha 250GETO Service Manual

6. Check the base. Replace if cracked or
damaged.
7. Check the bearing and oil seal. Replace
if damaged or worn.

Assembling the PTT motor

1. Install the new oil seal 1 and bearing 2
into the motor base 3 as shown.
2. Install the wave washer and bearing into
the frame.
3. Connect the PTT motor leads 4 to the
brush holder 5, and then install the
brush holder 5 to the frame 6.
4. Install the springs 7 and brushes 8 to
the brush holder.
6
4
5
7
7
8
7
7
6S35H11
2
3
1
6S370160
Lg
B
B
4
Sb
6S370165
5. Push the brushes 8 into the holders, and
then install the armature 9.
9
6. Install a new O-ring, and align the line
with mating mark and then install the sta-
tor.
NOTE:
Align the line on the frame with the mating on
the flame.
7. Install the PTT motor base.
PTT motor
8
8
6S370170
6S370180
7-30
1
2
3
4
5
6
7
8
9