Making The Initial Hmi Settings - Omron NA5-15*101 series Startup Manual

4 Creating and Debugging the HMI Application
4-6

Making the Initial HMI Settings

Use the following procedure to make the device settings and TCP/IP settings as the initial HMI settings.
1
Double-click HMI Settings under Configurations and Setup in the Multiview Explorer. The
HMI Settings Tab Page is displayed in the Configurations and Setup Layer.
2
The Device Settings View shown below is displayed. Here, the default settings are used.
• Device Settings
Item
Startup Page
Page name
Startup Language
Startup language
USB Keyboard
Key layout
Security
Automatically log out user after
period of inactivity.
Inactivity period
Screen Saver
Screen saver type
Active after
Screen Brightness
Screen brightness
System Menu
Double-tap Interval
Detectable corner
4 - 10
Sets the page to display first when the HMI is started.
Sets the project language to use when the HMI is started.
Sets the layout of a USB keyboard.
Select this check box to automatically log out the user after a specified
period of inactivity.
Specifies the time of inactivity before the user is logged out automatically.
Sets the type of screen saver.
Sets the time after the screen is touched before the screen saver is started.
Sets the brightness of the screen.
Sets the interval to use to detect double taps.
Select the corners in which to detect the operation to display the System
Menu.
NA-series Programmable Terminal Startup Guide (V120)
Description