Omron NA5-15*101 series Startup Manual page 42

4 Creating and Debugging the HMI Application
Opening an Existing Project
Use the following procedure to open an existing project.
1
Click the Open Project Button in the Project Window.
Click the
The Project List Dialog Box is displayed.
2
Select the project that was created in the NJ-series Machine Automation Controller Startup
Guide (CPU Unit) (W513) in the Project List Dialog Box and click the Open Button.
Click the
Additional Information
If you open a project that was created on a version of the Sysmac Studio that is older than ver-
sion 1.13, the following dialog box will be displayed. Click the OK Button and convert the proj-
ect so that it can be used in Sysmac Studio version 1.13 or higher.
4 - 4
Button.
Button.
NA-series Programmable Terminal Startup Guide (V120)