4 Creating and Debugging the HMI Application
Additional Information
The Simulator is not totally the same as the actual HMI. Final verification of operation on the
actual HMI is always required.
4-8-3
Debugging
Use the following procedure to debug the project that you created to ensure that it operates correctly.
Use the Simulator to click each button to confirm whether values are set in the Controller correctly and
lamps are displayed correctly.
1
Change the device to the Controller.
2
Click Global Variables under Programming - Data to open the Global Variables Tab Page, and
drag SwGreen, SwRed and SwYellow to a Watch Tab Page to register them.
4 - 24
NA-series Programmable Terminal Startup Guide (V120)