Creating The Hmi Application - Omron NA5-15*101 series Startup Manual

4 Creating and Debugging the HMI Application
4-3

Creating the HMI Application

Create the following application.
Each of the green, yellow, and red button-lamps is created by combining a colored Bit Lamp object and
a transparent Momentary Button object.
Green button-lamp Yellow button-lamp
Page0
Example:
Green button-lamp
Position the Bit Lamp objects and set the colors as shown below for the TRUE and FALSE status in the
Controller.
Assign the variables in the HMI as shown in the table.
Type of object
Bit Lamp objects
Momentary Button
objects
Additional Information
The Sysmac Studio provides a development environment for creating HMI applications with
variables. Therefore, you do not have to be conscious of the system configuration when you
create the HMI application.
4 - 6
HMI Global Variables
Red button-lamp
Variable
new_Controller_0_SwGreen
Variable
new_Controller_0_SwYellow
Variable
new_Controller_0_SwRed
Green Bit Lamp object
Transparent Momentary
Button object
Basic
ON color OFF color
color
Green LightGreen DarkGreen
Yellow Yellow Goldenrod
Red Red Firebrick
Green Transparent Transparent
Yellow Transparent Transparent
Red Transparent Transparent
Controller name in the project:
new_Controller_0
Controller Global Variables
ON: OFF:
LightGreen DarkGreen
These objects are overlapped
to create the button-lamp.
ON: OFF:
Transparent Transparent
Specified variable in Controller
new_Controller_0_SwGreen
new_Controller_0_SwYellow
new_Controller_0_SwRed
new_Controller_0_SwGreen
new_Controller_0_SwYellow
new_Controller_0_SwRed
NA-series Programmable Terminal Startup Guide (V120)
Variable
SwGreen
Variable
SwYellow
Variable
SwRed