Omron NA5-15*101 series Startup Manual page 49

• TCP/IP Settings
These settings are for the Ethernet port. Here, the default settings are used.
Item
Ethernet Port 1 - Settings
IP Address
Subnet mask
Default gateway
Primary DNS server
Secondary DNS server
Primary WINS server
Secondary WINS server Sets the IP address of the secondary WINS server.
Ethernet Port 2 Settings
Direct connection with
Sysmac Studio
IP Address
Subnet mask
Default gateway
Primary DNS server
Secondary DNS server
Primary WINS server
Secondary WINS server Sets the IP address of the secondary WINS server.
NA-series Programmable Terminal Startup Guide (V120)
4 Creating and Debugging the HMI Application
Sets the local IP address.
Sets the subnet mask.
Sets the IP address of the default gateway. This setting is not required
when a default gateway is not used.
Sets the IP address of the primary DNS server.
Sets the IP address of the secondary DNS server.
Sets the IP address of the primary WINS server.
Select this check box to connect Ethernet port 2 directly to the Sysmac
Studio without going through an Ethernet switch. If you select this check
box, the IP addresses and other settings for Ethernet port 2 are ignored.
Sets the local IP address.
Sets the subnet mask.
Sets the IP address of the default gateway. This setting is not required
when a default gateway is not used.
Sets the IP address of the primary DNS server.
Sets the IP address of the secondary DNS server.
Sets the IP address of the primary WINS server.
Description
4
4 - 11