4-8-2
Preparations for Offline Debugging
To prepare for offline debugging, use the following procedures to build the project and start the HMI
Simulator.
Building the Project
1
Select Build HMI from the Project Menu.
The results of building the project are displayed in the Build Tab Page. If any errors are found,
correct the project.
Starting the Simulator
1
Select Start NA Simulation from the Simulation Menu.
The Simulation Window is displayed.
This concludes starting the Simulator.
NA-series Programmable Terminal Startup Guide (V120)
4 Creating and Debugging the HMI Application
4
4 - 23