4 Creating and Debugging the HMI Application
Transferring the Project
Use the following procedure to transfer the project to the HMI. Use synchronization to transfer the proj-
ect. You can use synchronization on the Sysmac Studio to automatically compare the data on the com-
puter with the data in the HMI and transfer data to the HMI.
1
Use one of the following methods to display the Synchronization Window.
Method 1: Select Synchronization - NA Device from the HMI Menu.
Method 2: Click
Method 3: Press the
Comparison of the data on the computer and the data in the HMI starts. When the comparison is
completed, the comparison results are displayed.
The results of comparing the data on the computer and in the HMI are displayed.
4 - 20
in the Toolbar.
(Ctrl) +
M
Ctrl
Click this button to transfer the project from the computer to the HMI.
(M) Keys.
NA-series Programmable Terminal Startup Guide (V120)