Mapping Hmi Variables And Controller Variables - Omron NA5-15*101 series Startup Manual

4 Creating and Debugging the HMI Application
4-5 Mapping HMI Variables and Control-
ler Variables
Use the following procedure to map the Controller global variables to the HMI global variables.
Green button-lamp Yellow button-lamp
Page0
1
Double-click Variable Mapping under Configurations and Setup in the Multiview Explorer.
Or right-click Variable Mapping under Configurations and Setup in the Multiview Explorer
and select Edit from the menu.
2
Right-click User Variables under new_Controller_0 and select Create Device Variable from
the menu.
4 - 8
HMI Global Variables
Red button-lamp
Variable
new_Controller_0_SwGreen
Variable
new_Controller_0_SwYellow
Variable
new_Controller_0_SwRed
NA-series Programmable Terminal Startup Guide (V120)
Controller name in the project:
new_Controller_0
Controller Global Variables
Variable
SwGreen
Variable
SwYellow
Variable
SwRed
These variables are mapped.