Omron NA5-15*101 series Startup Manual page 54

4 Creating and Debugging the HMI Application
10
The Momentary Button object is not displayed. Set the color to Transparent. Click the Solid
Color Tab under Appearance − BackgroundColorButtonUp, and select Transparent. Set
BackgroundColorButtonDown, BorderColorButtonUp, and BorderColorButtonDown in
the same way.
11
Assign a variable to the Momentary Button object. Set Behavior − Variable in the properties to
new_Controller_0_SwGreen.
12
Create buttons for the red and yellow lamps in the same way. The settings are shown below.
• Yellow Button
4 - 16
NA-series Programmable Terminal Startup Guide (V120)