Installing The Sysmac Studio - Omron NA5-15*101 series Startup Manual

3 Preparations
3-1

Installing the Sysmac Studio

With the NA-series Programmable Terminals, the Sysmac Studio is used as the Support Software to
make settings for the NA Unit and connected devices and to create, debug, and simulate the applica-
tions.
Use the following procedure to install the Sysmac Studio on a computer.
1
Insert the Sysmac Studio installation disk into DVD-ROM drive. The setup program is automati-
cally started and the Select Setup Language Dialog Box is displayed.
2
Select the language to install and click the OK Button.
The Sysmac Studio Setup Wizard is displayed.
3
Install the Sysmac Studio according to the instructions provided by the Setup Wizard.
4
When the installation is completed, restart the computer.
Additional Information
• The system requirements for the computer on which to install the Sysmac Studio are given in
the following table.
Windows XP SP3
Windows Vista
Windows 7, 32-bit or
64-bit edition
Windows 8, 32-bit or
64-bit edition
• If the Sysmac Studio cannot be installed with the above procedure, refer to the Sysmac Stu-
dio Version 1 Operation Manual (W504).
Precautions for Correct Use
If CX-One version 4 or lower is installed on the computer, installation of the Sysmac Studio is
cancelled and installation is not possible. Uninstall the CX-One first and then install the Sysmac
Studio.
3 - 2
OS
Mini-
mum
Recom-
mended
Processor
Computer with a Celeron 540
(1.8 GHz) processor or
higher.
Computer with a Core i5
M520 (2.4 GHz) processor,
equivalent, or higher.
NA-series Programmable Terminal Startup Guide (V120)
RAM Display
2 GB XGA
1,024 x 768 dpi
16,000,000 colors
2 GB WXGA
1,280 x 800 dpi
16,000,000 colors