Creating And Transmitting Screen Data - Omron NT620S Operation Manual

Creating and Transmitting Screen Data

4-1 Creating and Transmitting Screen Data
Reference
4-1-1 Setting the Support Tool for Use with the NT620S/620C
114
This section describes briefly the support tool settings required for creating
screen data and the screen data creation procedure.
For the details of the support tool and screen data creation, refer to the "NT-se-
ries Support Tool Operation Manual" (V028-E1-j).
To create the screen data for the NT620S/620C, make settings with the support
tool for use with the NT620S/620C.
To create the NT620S/620C screen data, make settings in the "Tool Settings"
screen as follows.
NT620S
- NT Model : 610G (There is no "620S" setting.)
- Memory Size : 512 KB
- Direct Access : Ver.4
Select "Tool Settings".
\
\
Section 4-1