Fig. 12 Configuration Of A Fast Hot Connect Group; Fig. 13 Marking In The Twincat System Manager - Beckhoff EK1101 Documentation

Product overview
Configuration
The configuration of Fast Hot Connect groups in the TwinCAT System Manager takes place in exactly the
same way as Hot Connect groups, specifying the associated group ID.
Fig. 12: Configuration of a Fast Hot Connect group
Corresponding Fast Hot Connect ports are marked red in the TwinCAT System Manager.
Fig. 13: Marking in the TwinCAT System Manager
A configuration of FHC groups is possible only if at least 1 corresponding junction is present e.g.
EK1122-0080.
EK110x, EK15xx Version: 3.6 21