Approvals; Disposal Instruction - Danfoss VLT DriveMotor FCP 106 Operating Instructions Manual

Introduction

1.4 Approvals

Certification
EC Declaration of
Conformity
UL listed
UL recognized
C-tick
The EC declaration of conformity is based on the following
directives:
•
Low Voltage Directive 2006/95/EC, based on EN
61800-5-1 (2007).
•
EMC Directive 2004/108/EC, based on EN 61800-3
(2004).
UL listed
Product evaluation is complete and the product can be
installed in a system. The system must also be UL listed by
the appropriate party.
UL recognized
More evaluation is required before the combined
frequency converter and motor can be operated. The
system in which the product is installed must also be UL
listed by the appropriate party.
The frequency converter complies with UL 508C thermal
memory retention requirements. For more information,
refer to the section Motor Thermal Protection in the
product-specific design guide.

1.5 Disposal Instruction

Equipment containing electrical components
must not be disposed of together with domestic
waste.
It must be separately collected with electrical
and electronic waste according to local and
currently valid legislation.
MG03L302
Operating Instructions
FCP 106 FCM 106
✓ ✓
✓
–
✓
–
✓ ✓
Danfoss A/S © 11/2015 All rights reserved.
1 1
7