Additional Resources; Product Overview; Intended Use - Danfoss VLT DriveMotor FCP 106 Operating Instructions Manual

Introduction

1.2 Additional Resources

Available literature:
•
®
VLT DriveMotor FCP 106/FCM 106 Operating
Instructions, for information required to install and
commission the frequency converter.
•
®
VLT DriveMotor FCP 106/FCM 106 Design Guide
provides information required for integration of
the frequency converter into a diversity of
applications.
•
®
VLT DriveMotor FCP 106/FCM 106 Programming
Guide, for how to program the unit, including
complete parameter descriptions.
•
®
VLT LCP Instruction, for operation of the local
control panel (LCP).
•
®
VLT LOP Instruction, for operation of the local
operation pad (LOP).
•
Modbus RTU Operating Instructions and VLT
DriveMotor FCP 106/FCM 106 BACnet Operating
Instructions for information required for
controlling, monitoring, and programming of the
frequency converter.
•
®
The VLT PROFIBUS DP MCA 101 Installation Guide
provides information about installing the
PROFIBUS and troubleshooting.
•
®
The VLT PROFIBUS DP MCA 101 Programming
Guide provides information about configuring the
system, controlling the frequency converter,
accessing the frequency converter, programming,
and troubleshooting. It also contains some typical
application examples.
•
®
VLT Motion Control Tool MCT 10 enables configu-
ration of the frequency converter from a
™
Windows -based PC environment.
•
®
Danfoss VLT Energy Box software, for energy
calculation in HVAC applications.
MG03L302
Operating Instructions
Technical literature and approvals are available online at
vlt-drives.danfoss.com/Support/Service/.
Danfoss VLT
www.danfoss.com/BusinessAreas/DrivesSolutions, PC software
download area.

1.3 Product Overview

1.3.1 Intended Use

The frequency converter is an electronic motor controller
intended for:
•
•
®
The frequency converter can also be used for motor
overload protection. The frequency converter is allowed for
use in residential, industrial, and commercial environments
in accordance with local laws and standards.
Depending on configuration, the frequency converter can
be used in standalone applications or form part of a larger
application or installation.
When using a motor with thermal protection, the
frequency converter is allowed for use in residential,
industrial, and commercial environments in accordance
with local laws and standards.
Foreseeable misuse
Do not use the frequency converter in applications which
are non-compliant with specified operating conditions and
environments. Ensure compliance with the conditions
specified in chapter 7 Specifications.
Danfoss A/S © 11/2015 All rights reserved.
®
Energy Box software is available at
Regulation of motor speed in response to system
feedback or to remote commands from external
controllers. A power drive system consists of:
- The frequency converter.
- The motor.
-
Equipment driven by the motor.
System and motor status surveillance.
1 1
5