Table of Contents
Advertisement
3.2
LIGHTING THE APPLIANCE
IMPORTANT : IF THE BURNER IS EXTINGUISHED FOR ANY REASON YOU MUST ENSURE THAT
YOU WAIT A FULL FIVE MINUTES BEFORE ATTEMPTING TO RE-LIGHT THE FIRE.
The product is controlled by the remote handset supplied with the fire. Ensure the
1 off 9V battery as supplied in the loose items pack have been fitted to the remote
handset before attempting to use the handset and the batteries have been made
to the product as per section 2.10.
There are 4 modes of operation of the product, "MANUAL mode",
"TEMPERATURE mode", "TIMER mode"and "LIGHTING / DIMMER" mode.
3.2.1
Operation of the Fire in "MANUAL" mode
3.2.1.1
Locate the ON/OFF switch on the appliance, it is situated behind the
access cover at the bottom of the as shown below in figure 29. Ensure
that the on / off switch on the valve is in the "ON" (1) position
Fig. 29
3.2.1.2
The remote handset is now used to control all functions of the fire. To
light the fire, press the "UP" arrow and and "OFF" button simultateously.
as shown on figure 30 below. You will hear a click and the fire begins a
30 second ignition process. The pilot and main burner will light.
The appliance is now in "MANUAL mode" which will be shown via the
"MAN" graphic on the display of the handset as shown below in figure
30.
Fig. 30
Manual Graphic
on Handset Display
27
Advertisement
Table of Contents
