Table of Contents
Advertisement
3.2.5
Low Battery Signal
3.2.5.1
When the battery in the handset needs replacing, "BATT" will be
displayed on the handset.
3.2.5.2
Remove the cover on the rear of the handset and replace the 3 off AAA
batteries as necessary.
3.2.6
To Set the Time on the Remote Handset
3.2.6.1
Simultanelously press the "UP" (large flame) arrow and "DOWN" (small
flame) arrow buttons on the remote handset.
3.2.6.2
Press the "UP" (large flame) arrow to set the hour and the "DOWN"
(small flame) arrow to set the minutes.
To Set the o C / 24 Hour or o F / 12 Hour Clock
3.2.7
3.2.7.1
Press and hold the "OFF" and the "DOWN" (small flame) arrow buttons
on the handset simultaneously until the display changes from o C to o F
and vice versa
3.3
Fitting the handset wall bracket
3.3.1
The wall bracket is supplied in the loose items pack and is optional to
fit.
If fitting the wall bracket, please be advised that the thermostatic
3.3.2
sensor is contained within the handset itself, so the position of the
wall bracket will therefore be the position of temperature
measurement within the room. To fit, position as necessary, mark hole
positions, drill and secure with fixings provided.
3.4
Instructing the user / product handover
3.4.1
Instruct the user on the operation of the fire and the handset.
3.4.2
Hand the glass clamp over and advise the customer to store it in a safe
place.
31
Advertisement
Table of Contents
