Table of Contents
Advertisement
2.5
INSTALLATION OF THE GAS SUPPLY
2.5.1
Before installing the firebox, decide from which side or if a rear
connection to the gas supply is required. Plan the pipe run to enter the
firebox from the left, right or rear and connect to the inlet elbow. See
below :-
2.5.2
If concealed pipe work is required plan the pipe run to enter the fire box
through the opening in the rear of the fire box and connect to the inlet
elbow. See section 2.13 for burner removal to obtain access to the inlet
elbow cover plate. See figure 7 & 8 below for a suggested concealed
pipe layout.
Fig. 7
Fig. 8
Note : Before breaking into the gas supply a pressure drop test should be
carried out to establish that the existing pipework is sound.
Gas Supply
Approx.
100mm
Gas Supply
Approx.
525mm
10
Firebox
Fireplace
Firebox
Fireplace
Advertisement
Table of Contents
