Table of Contents
Advertisement
3.2.1.3
With the product in "MANUAL" mode the fire can now be switched
between HIGH rate heat input and LOW rate heat input by pressing the
"DOWN" arrow on the handset. To reduce the flame height of the main
burner incrementally, press the arrow momentarily. To reduce the heat
input directly down to the minimum level, press the "SMALL" flame
arrow on the handset twice, "LO" will be displayed. NOTE : The flame
will go to HIGH rate heat input before going to designated LOW rate
heat input. To return back to HIGH rate heat input press the
"LARGE" flame button twice. To put the fire in In "STANDBY MODE"
(only the pilot remains lit) press and hold the "SMALL" flame arrow on
the handset. See figure 31 below.
Fig. 31
"SET" Button
"OFF" Button
3.2.1.4
To turn the fire off, press the "OFF" button, this will extinguish all flames
including the pilot.
28
"LARGE" Flame /
"UP" Arrow Button
"SMALL" Flame /
"DOWN" Arrow Button
Advertisement
Table of Contents
