Table of Contents
Advertisement
Fig. 6
FITTING THE BATTERY (CONT.)
3.1
LIGHTING THE APPLIANCE
a)
Light the pilot by depressing the control knob at the "off" position and
turn anti-clockwise (with the control depressed) to the second position
marked *.
b)
When the pilot lights, (pilot can be seen through the right hand side of
the fuelbed) hold the control knob down for 10 seconds.
c)
If the pilot fails to light, repeat the ignition sequence and hold in the
control knob for slightly longer.
d)
When the pilot has lit, release the control knob from the depress
position, depress slightly again and turn the control anti-clockwise to the
high position and check for clearance of combustion products as
detailed overleaf.
AA Battery
13
Spark Generator
Battery Cap
Advertisement
Table of Contents
