Table of Contents
Advertisement
5.3
LIGHTING THE FIRE / USER CONTROLS
IMPORTANT :
The product is controlled by the remote handset supplied with the fire. Ensure the
1 off 9V PP3 battery as supplied in the loose items pack has been fitted to the
remote handset before attempting to use the handset. There are 4 modes of
operation of the product, "MANUAL mode", "TEMPERATURE mode", "TIMER
mode" and "LIGHTING / DIMMER" mode.
5.3.1
Operation of the Fire in "MANUAL" mode
5.3.1.1
Locate the ON/OFF switch on the appliance, it is situated as shown
below in figure 1. Ensure that the on / off switch is in the "ON" (1)
position.
Fig. 1
5.3.1.2
The remote handset is now used to control all functions of the fire. To
light the fire, press the "UP" arrow and and "OFF" button simultateously
as shown on figure 2 overpage. You will hear a click and the fire begins
a 30 second ignition process. The pilot and main burner will light. The
appliance is now in "MANUAL mode" which will be shown via the "MAN"
graphic on the display of the handset as shown overpage in figure 2.
IF THE BURNER IS EXTINGUISHED FOR ANY REASON YOU
MUST ENSURE THAT YOU WAIT A FULL THREE MINUTES
BEFORE ATTEMPTING TO RE-LIGHT THE FIRE.
37
Advertisement
Table of Contents
