Table of Contents
Advertisement
Transmission module:
EE242/EE244:
EE245:
This equipment complies with Part 15 of the FCC Rules.
Operation is subject to the following conditions:
• this device may not cause harmful interference
• under direct influence of EMC interference the device must continue to function, including interference
that may cause an undesired operational situation.
Regulatory conformity
United States (FCC Part 15.247)
Industrie Kanada (IC)
Europa (RED)
Australien
Specific Instructions:
The transmission energy of the series EE240 is limited according to certain standards,
alterations of the electronics are therefore, with respect to the transmission license, prohibited.
USA:
The antenna must be mounted more than 20cm (8 inches) away from any human body.
2
PRODUCT DESCRIPTION
The wireless transmitter series EE240 combines modern sensor technology, easiest system installation
and the highest reliability of the data transmission. The several different modules of the series EE240
are within a short time operational.
2.1
Wireless Network
2.1.1
General
The series EE240, based on the "ZigBee" protocol, transmits at a frequency of 2.4 GHz with a power of
6,3 mW. A bi-directional wireless connection prevents loss of data, if disturbances may occur.
The maximum transmission distance depends greatly on the local conditions. Obstacles, like walls of
reinforced concrete, steel buildings, or structures attenuate the signal and decreases the transmission
distance.
Operating manual Series EE240 Wireless sensor
Contains FCC ID: MCQ-S2CTH
Contains FCC ID: MCQ-XBS2C
EE242 / EE244
FCC ID: MCQ-S2CTH
IC: 1846A-S2CTH
CE Labeling
RCM
EE245
FCC ID: MCQ-XBS2C
IC: 1846A-XBS2C
CE Labeling
RCM
5
Advertisement
Table of Contents
