Creating An Ethernet Connection Between Personal Computer And Ee242; Ip-Address Of The Base Station (Default Factory Settings); Setup Of Ip-Address - E+E Elektronik EE240 Operating Manual

11 CREATING AN ETHERNET CONNECTION BETWEEN
PERSONAL COMPUTER AND EE242

11.1 IP-address of the base station (default factory settings)

IP-address of EE242-Basis Station:
Subnet Mask:

11.2 Setup of IP-address

1. STEP:
In order to establish communication between the personal computer and EE242, the IP-address of the
personal computer has to be altered to fit the IP-number range of the EE242 base station.
For example Windows XP: [start] ► Systemsteuerung ► Netzwerkverbindungen
In the dialog box "Local Area Connections
Properties" point at "Internet Protocol
(TCP/IP)" and click the button "Properties".
20
192.168.0.64
255.255.255.0
Right-click „Local Area Connection" a click "Properties"
Check "Use the following IP-address" and
change the computer IP-address to 192.168.0.X
(choose X between 33 and 63).
192.168.0.64 is already used by EE242!
Enter in the "Subnet Mask" field '255.255.255.0'
and click the "OK" button to save the setup.
Operating manual Series EE240 Wireless sensor