Table of Contents
Advertisement
12.5 Management
12.6 About
Operating manual Series EE240 Wireless sensor
Wireless Network
- „Open System":
In this mode the base station is always in "Connect Mode" and
can accept at any given time a 'connection request' from an E+E
transmitter.
Attention: if two wireless systems are built parallel to each other
a separation of the clients cannot be controlled
„Closed System":
In this mode the base station must be switched to "Connect
Mode" before it can accept 'connection requests' (see chapter 4,
Starting Up the Wireless System).
Cable Network
IP Address Assignment:
-
Manual (static IP): enter or change manually theIP-address of
the base station
-
Automatic (DHCP): the IP-address will be obtained
automatically from the DHCP-server
Setting Backup/Restore
This feature allows to save all settings to a Backup-File on the
PC to restore the old settings in case of an accidental reset to
"factory settings" (see section 3.1.5).
Passwords
Here the login-designation (admin, reader) and the password can
be changed.
27
Advertisement
Table of Contents
