Table of Contents
Advertisement
Edit:
One can change the configurable data (name, transmission interval); store with "Save Changes".
To leave the edit-menu, click the hyperlink
12.2.2 Probe Status
If clicked in the 'Transmitter List' on the hyperlink "Name" or "Serial Number", the details of the selected
transmitter will be shown in the bottom part of the screen. Depending on the transmitter model up to
three sensing probes can be connected.
Shows all available data of sensing probe 1:
Status:
There are three conditions: OK / WARNING / ALERT, see chapter 12.1 Overview.
Data Age:
Indicates the elapsed time since the last transmission of measurement data.
Meaning of the Status:
„OK"
-
„Warn"
-
„Alert"
-
TM-Port:
indicates to which port the sensing probe is connected (see sketch).
Probe:
Type of sensing probe and serial number.
Measurand:
Indicates the active measurement parameter of the sensing probe
(Temperature, Humidity, CO2,..).
Measured Value:
Last transmitted measured value.
More transmitter details will be listed as soon as more sensing probes are connected to the transmitter.
Replacement of a sensing probe:
If a sensing probe has to be replaced (e.g. calibration, etc...), this can be done in a few easy steps:
1. Disconnect the old sensing probe.
2. Connected the new sensing probe.
3. Remove the old sensing probe from the system by clicking "Delete Probe".
Operating manual Series EE240 Wireless sensor
the wireless connection functions w/o failures
the last two data transmissions failed
several data transmissions failed
„Back to Transmitters"
Port 1
Port 2
Port 3
23
Advertisement
Table of Contents
