Operating Components Ee244 - E+E Elektronik EE240 Operating Manual

Series ee240 wireless sensor for humidity temperature co2
Hide thumbs Also See for EE240:
Table of Contents

Advertisement

3.2.3

Operating components EE244

1. Interval rotary-switch „TIME"
2. Push-button „CONNECT"
1. Interval rotary-switch "TIME":
With the rotary switch "TIME", the following transmission and measurement intervals can be selected:
Switch positon
0
1
2
3
4
5 = default
6
7
8
9
Attention: With the webserver (EE242 Base Station), any time interval can be configured. Selecting a
time interval of less than 15 minutes for the transmitter, will greatly reduce the operating life of the batte-
ries. Typical operating life is up to 3 years, based on a transmission interval of 15 minutes (for T / %RH).
2. Push-button „CONNECT":
To establish the initial connection between the base station and the transmitter.
(For a detailed technical description, see chapter 4. "Starting up the Wireless System".)
Additionally the status of "signal strength level [%]" can be activated temporary with this key.
If you press the key for 1 sec while connecting the voltage supply (or the last battery is
inserted) the EE244 shows the "signal strength level [%] of the wirless connection for 60 sec before
switching back to the normal display mode.
3. Display:
Place the display on the designated pins.
Display symbols:
><
On the display all available measured values (RH, T, CO2) of the sensors (up to 3) are alternatly
indicated. Warning: The measured values are updated in the adjusted interval „TIME" (see chapter
3.2.3.1).
4. Battery compartment:
Alkaline batteries, 4 off (1.5V, AA)
5. Jumper „J1" (EXT/BAT):
The allocation of the jumper allows for the selection of 'battery power' or 'external power'.
Operating manual Series EE240 Wireless sensor
Interval
20 sec.
30 sec.
45 sec.
1 min.
2 min.
5 min.
10 min.
15 min.
20 min.
30 min.
><
This symbol is 'on' if the wireless connection is established
and 'blinks' if the connection fails.
°C / °F
Unit of the chosen temperature value
%RH
Unit for rel. humidity (%RH)
3. Display
4. Battery compartment
5. Jumper „J1" (EXT/BAT)
Switch positon
A
B
C
D
E
F
Interval
45 min.
60 min. (1 hr)
90 min. (1,5 hr)
120 min. (2 hr)
180 min. (3 hr)
240 min. (4 hr)
11

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ee244Ee242Ee245

Table of Contents