Table of Contents
Advertisement
1.
This manual forms part of the scope of supply and serves to ensure proper handling and
optimum functioning of the instrument. Consequently, it is essential to read the manual before
commissioning. The manual is also to be brought to the attention of any person involved in
transport, setup, operation, maintenance or repair.
This manual must not be used for competition purposes without the written consent of E+E
Elektronik and must not be forwarded to third parties. Copies for personal use are permitted.
All information, technical data and illustrations contained in this manual are based on the
information available at the time of publication.
1.1
This symbol indicates a safety instruction.
Safety instructions must always be followed. Failure to do so can result in injuries or damage,
for which E+E Elektronik accepts no liability.
This symbol indicates a note.
These notes should be observed to achieve optimum functioning of the equipment.
1.2
1.3
E+E Elektronik products are developed with due consideration to all major environmental issues.
Bearing this in mind, care should also be taken to avoid polluting the environment when
disposing of equipment. When disposing of the sensor, the individual components must be
sorted according to type. Electronic components must be kept together and disposed of in the
proper manner for electronic scrap.
2.
The EE75 velocity sensors were developed to obtain accurate measuring results over a wide
range of velocities and temperatures.
They have a robust metal enclosure to protect them against possible damage in rough
industrial environments and come in three different typs, providing a comprehensive range of
mounting options:
Hardware
General
Symbol Assertion
Safety Instructions
•
Excessive mechanical stress and improper use must be avoided.
•
As the sensor element is sensitive to electrostatic discharge (ESD), appropriate
protective measures should be taken when touching it.
•
Installation, electrical connection, maintenance and commissioning must only be
carried out by qualified personnel.
Installing the Enclosure
Product Description
•
Type T2 for duct mounting
•
Type T3 with remote probe
•
Type T26 with remote probe, pressure-tight to 10 bar
(145psi)
3
Advertisement
Table of Contents
