Table of Contents
Advertisement
2. STEP:
• Connect the personal computer and EE242 with the "crossover cable" (PC-EE242: HA010333)
or log both in to the same network.
• Establish power to the EE242.
• Start the internet browser and enter the IP-address of the base station: http://192.168.0.64
• Enter "Username" and "Password" - the following profiles are already entered by the factory:
- Reader:
- Administrator:
• As soon as the password has been entered the web server platform will start automatically. Several
configurations can be altered under the menu item "Management", e.g. the IP-address of the EE242
base station or the password for Username "Reader" and "Admin"
(for details see chapter 12.4. Management)
12 MENU ITEMS
12.1 Overview
Shows an overview of the wireless network and its components
Webserver:
All indicated data are updated in a 5sec-interval.
Operating manual Series EE240 Wireless sensor
username
= reader
password
= reader
username
= admin
password
= admin
Warn
Alert
OK
Hyperlinks link into the different software menus
Status of the entire wireless network
"Warn" - warning
"Alert"
- alarm / failures have occurred
"OK"
- the entire network functions properly
Transmitters:
Line 1:
number of active transmitters
Line 2:
number of active routers
Line 3:
total number of active transmitters
and routers
Base Station:
Line 1:
model number
Line 2:
serial number of the base station
Line 3:
elapsed time since last interruption
21
Advertisement
Table of Contents
