Table of Contents
Advertisement
12.5
Management
12.6
About
Wireless Network
- „Open System": in this mode the base station is always in
"Connect Mode" and can accept at any given time a
'connection request' from an E+E transmitter.
Attention: if two wireless systems are built parallel to each
other a separation of the clients cannot be controlled
- "Closed System": in this mode the base station must be
switched to "Connect Mode" before it can accept 'connection
requests' (see chapter 4, Starting Up the Wireless System).
Cable Network
IP-address Assignment
-
Manual (static IP): enter or change manually the IP-address
of the base station
- Automatic (DHCP): the IP-address will be obtained
automatically from the DHCP-server
Setting Backup/Restore
This feature allows to save all settings to a Backup-File on the
PC to restore the old settings in case of an accidental reset to
"factory settings" (see section 3.1.5).
Passwords
Here the login-designation (admin, reader) and the password
can be changed.
25
Advertisement
Table of Contents
